EN Prodotti - Pluvio

Products

Pluvio - Drip Irrigation System Pluvio - Packaging

Pluvio - Drip Irrigation System

ATP DRIPPING PIPES & HOSES are used to carry out drip irrigation installations in agricultural. They allow saving resources, assure excellent performances and increase of production.
ATP DRIPPING PIPES & HOSES is the result of more years of experience and testing in this field. They consist of pipes and hoses in polyethylene (plastic raw materials) of first quality, designed to ensure the best performance, for each type of culture.
ATP DRIPPING DEVICES patented, are inserted during the extrusion in order to weld it very well to the inside of the pipes/hoses. Their internal air spaces slow water pressure down and are designed to be large in order to avoid occlusions and deposits. This structure reduces the water losses and make it possible to install long-distance systems with regular capacity.

video

PLUVIO Dripping Hose

"PLUVIO" is a dripping system manufactured with a thin, flexible pipe, with fast water jets dripping devices inside, put at prearranged distances (from cm 15, 20 up to cm 150).
It is made of polyethylene of very good quality, which guarantees maximum long-term dependability and the best performance as regards mechanical and tensile strength.
The dripping device, ATP patented, is inserted during extrusion in order to make it tie up very well to the inside of the pipe.Its internal air spaces slow water pressure down and are designed to be large in order to avoid occlusions and deposit. Moreover, this structure reduces water losses and make it possible to install long-distance systems with regular capacity.
The "PLUVIO" Dripping Hose is a reliable and convenient solution for drip irrigation systems applied to any kind of cultivation, intensive irrigation of open fields as well as horticultural and arboreal cultivation, flower growing and gardening.
The "Pluvio" dripping hose and its dripping device allow to programme the quantity of water necessary and reduce labour costs, with a subsequent rise in quantity and quality of harvests.

Available versions

The "PLUVIO" Dripping Hose is available of mm 16 and mm 22 diameters and of different thicknesses: mm 6, 8, 10, 12, 15, 18.
Spacing between dripping devices are available of cm 10 up to cm 150.
Such a wide range of thicknesses and spacing has been designed to satisfy different demands of irrigation, for one season as well as long-term irrigation systems.

Advantages
• Water supply is graduated for each hole, which determines a rise in quality and quantity of water calculated according to plants' needs
• Reduction in the use of fertilizers whose percentage can be calculated according to the capacity of the dripping device and to the length of the dripping pipe
• Reduction in labour, because these systems are mechanically installed
• PLUVIO hose usage reduces maintenance charges because of lack of connections.

Technical properties
See the table here.

A.T.P. - Dripping Pipe

The "ATP dripping pipe" is a cylindrical pipe, in polyethylene of very good quality, with dripping devices, put in the pipe at prearranged distances, which spurt fast jets of water.
The "ATP dripping device" is the result of years of experience and testing in this field.
It is composed of large-section holes which, thanks to fast water jets, reduce the risk of occlusion, obstruction and sedimentation, due to fertilizers, of the dripping device's air spaces.The "ATP dripping device" is symmetrical, patented and designed to fit in the pipe and to prevent it from coming off and breaking.
These specific characteristics make the "ATP dripping pipe" resistant to friction, crushing and mechanical stress when installed.
Pressure losses are reduced thanks to the smoothness and thickness of its partition; moreover the dripping device is easy to clean and that makes it suitable for long-distance use.

Available versions
The "ATP dripping pipe" is available in two different diameters: mm 16 and mm 20, with spacing between the holes of dripping devices from cm 20, cm 30, cm 40 up to cm 150. The dripping devices capacity goes from 2 l/h up to 4 l/h. For both diameters and for each spacing the models available are:
• NORMAL with 3 holes for water jets;
• DOUBLE with 6 holes for water jets.
The DOUBLE version, with 6 holes, permits the irrigation of wider areas and reduces percolation, especially on sandy grounds.

Advantages
• Production increases in quantity and quality because water consumption is calculated according to plants' needs
• Reduction in the use of fertilizers whose percentage can be calculated according to the capacity of the dripping device and to the length of the dripping pipe
• Reduction in labour costs, as these systems are simple to install and do not require maintenance because of lack of connections
• After use, or after harvest, the dripping pipe can be used again
• The DOUBLE model, with 6 holes, is recommended for sandy grounds in order to irrigate wider areas and reduce percolation.

Applications

• Long-term irrigation systems
• Irrigation systems for open fields and greenhouses
• Vegetables and fruit growing
• Flower growing and gardening
• Irrigation of slant fields
• Fertirrigation
• Sub-irrigation systems

Sub-Irrigation
The "ATP dripping pipe" is used for irrigation on fields as well as for sub-irrigation systems.

Technical properties
See the table here.

A.T.P. - PC-DRIP Dripping Pipe

The "PC-DRIP ATP" is a drip irrigation system which consists of a cylindrical pipe, in polyethylene of very good quality, with fast water jets self-compensating dripping devices put in the pipe at prearranged distances.
The "PC-DRIP ATP dripping device" is self-compensating and reliable thanks to its sturdiness. The pressure of water jets is regular thanks to the dynamic change of the labyrinth put inside the pipe.
The innovative dripping device by regulating the water jets, allows the restriction of the flow. Its specific structure reduces the risk of obstruction, due to deposit, which might block water flow: indeed, the compensating system always keeps the labyrinth's cross-sections at 1,0 mm 2 (about 50 times more than other dripping devices on the market).
A further advantage of the "PC-DRIP ATP" is given by the fact that the first part of the labyrinth is very short and does not require high starting pressure to operate: this reduces operating costs, without requiring high pressure/volume pumping structures.

Available versions
The "PC-DRIP ATP dripping pipe" is available of mm 16 diameter, with spacing between holes from cm 20 up to cm 150 and with 2 l/h and 4 l/h nominal capacity dripping devices. For each spacing the models available are:
• PCDRIP NORMAL with 3 holes for water jets.

Advantages
• Water flow is uniform also on slant fields
• Rise in quantity and quality of production because water supply is calculated according to plants' needs
• Reduction in the use of fertilizers whose percentage can be calculated according to the capacity of the dripping device and to the length of the dripping pipe
• Maximum dependability of sub-irrigation and on field irrigation systems
• Highly safe from obstructions and blockage, thanks to the innovative dripping device.

Applications
• Long-term irrigation systems
• Irrigation systems for open fields and greenhouses
• Vegetables and fruit growing
• Flower growing and gardening
• Irrigation of slant fields
• Fertirrigation
• Sub-irrigation systems.

Technical properties
See the table here.